Thứ Tư, 14 tháng 12, 2016
Thứ Hai, 12 tháng 12, 2016
Thứ Sáu, 9 tháng 12, 2016
Rotel RSX 1056, Rotel RSX 1057 Power and amplifier circuit diagram
Rotel SURROUND SOUND RECEIVER RSX-1057
Continuous Amplifier Power (five channels driven)
75 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
Continuous Amplifier Power (two channels driven)
100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Power Requirements (AC)
120 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
Rotel SURROUND SOUND RECEIVER RSX-1056
Continuous Amplifier Power (five channels driven)
75 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
Continuous Amplifier Power (two channels driven)
100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Power Requirements (AC)
115 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
RSX1056 power schematic
RSX1056 Power amplifier schematic and PWB
RSX1057 Power schematic
RSX1057 Power amplifer schematic and PWB
Continuous Amplifier Power (five channels driven)
75 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
Continuous Amplifier Power (two channels driven)
100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Power Requirements (AC)
120 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
Rotel SURROUND SOUND RECEIVER RSX-1056
Continuous Amplifier Power (five channels driven)
75 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
Continuous Amplifier Power (two channels driven)
100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Power Requirements (AC)
115 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
RSX1056 power schematic
RSX1056 Power amplifier schematic and PWB
RSX1057 Power schematic
RSX1057 Power amplifer schematic and PWB
Thứ Tư, 30 tháng 11, 2016
Thứ Hai, 28 tháng 11, 2016
Thứ Bảy, 26 tháng 11, 2016
Thứ Năm, 24 tháng 11, 2016
CL21N11MJZXXAX Samsung DIGITAL TELEVISION RECEIVER Circuit diagram - Chassis : KS9A(N)
Used ICs: TDA9352PS/N21/3-OTP, 24C04, LA6510, 346VF2(Infrared sensor), KA5Q0765R | KA5Q0740RT(120v) | KA5Q0765RT (220V), KA7632, FCA173B(FBT), NJM2235D, AN7522N, MSP3425G-B7 and TDA6107Q [NTSC system – North America, South Central America and Mexico]
FOCUS Adjustment
1. Input a black and white signal.
2. Adjust the tuning control for the clearest picture.
3. Adjust the FOCUS control for well defined scanning lines in the center area of the screen.
Factory Adjustment
To enter the “Service Mode”, Press the remote-control keys in this sequence :
- If you do not have Factory remote-control
Picture OFF > Mute > 1 > 8 > 2 > Picture ON
- If you have Factory remote-control
Picture ON > Display > Factory
FOCUS Adjustment
1. Input a black and white signal.
2. Adjust the tuning control for the clearest picture.
3. Adjust the FOCUS control for well defined scanning lines in the center area of the screen.
Factory Adjustment
To enter the “Service Mode”, Press the remote-control keys in this sequence :
- If you do not have Factory remote-control
Picture OFF > Mute > 1 > 8 > 2 > Picture ON
- If you have Factory remote-control
Picture ON > Display > Factory
Circuit diagram
Click on the circuit diagrams to magnify
Thứ Tư, 23 tháng 11, 2016
Sony HCD ZUX9 circuit diagram - MINI Hi-Fi COMPONENT SYSTEM - US Model, E Model, Australian Model
ICs Used: STK412-150C – IS81LV6416-10TLT[S-RAM] – TMP92CD28AFG[USB controller] – M30624MGP-B33FPU0(US) or M30624MGP-B34FPU0(Except US)[System control] – M61537FP-RF0G(Rec-Playback AMP) – BH2210FV-E2
Click on the pictures to zoom in
AUDIO POWER SPECIFICATION
(US model only)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6-ohm loads, both channels driven, from 120 Hz – 10 kHz; rates 160 watts per channel minimum RMS power, with no more than 10 % total harmonic distortion from 250 milliwatts to rated output.
(US model only)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6-ohm loads, both channels driven, from 120 Hz – 10 kHz; rates 160 watts per channel minimum RMS power, with no more than 10 % total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
The following are measured at US model:
AC 120 V, 60 Hz
Other models:
AC 120, 220, 240 V, 50/60 Hz
Front/Surround speaker Power Output (rated): 160 W + 160 W (at 6 Ω, 1 kHz, 1% THD)
RMS output power (reference): 250 W + 250 W (per channel at 6 Ω, 1 kHz, 10% THD)
The following are measured at US model:
AC 120 V, 60 Hz
Other models:
AC 120, 220, 240 V, 50/60 Hz
Front/Surround speaker Power Output (rated): 160 W + 160 W (at 6 Ω, 1 kHz, 1% THD)
RMS output power (reference): 250 W + 250 W (per channel at 6 Ω, 1 kHz, 10% THD)
USB board schematic
Transformer board schematic
Main board schematic
Power amplifier board schematic
Thứ Năm, 27 tháng 10, 2016
Sanyo C29LF41 - CRT TV circuit diagram
Sanyo C21LF41, Sanyo C21LF41B.
PhilcoPF2127, PF2107, PS2117.
NisatoTVZ2001M.
Stell Home SHT212F.
Diplomatic GMTV114M, GMTV210M, GMTV12.
Noblex 14TC669,20TC670, 21TC671F, 21TC672F, 21TC674.
PhilcoPF2127, PF2107, PS2117.
NisatoTVZ2001M.
Stell Home SHT212F.
Diplomatic GMTV114M, GMTV210M, GMTV12.
Noblex 14TC669,20TC670, 21TC671F, 21TC672F, 21TC674.
Used ICs: QXXAVC570 = STR-W6753, SE130NH, LA78040N / B / E, LA42032E, CXA2234QP,QXXAVC890 = LA76931ADE58S / E
SMPS split
Full circuit diagram
Đăng ký:
Bài đăng (Atom)